Tramex

Electrowelded grating deck for heavy and/or concentrated loads
scroll down
Back

Tramex

The Tramex electrowelded grating with pre-galvanised finish, consisting of an extremely robust, safe and lightweight structure, is vital when you need to store heavy and concentrated loads or when you do not know the exact position of the load on the racking. The rod electrowelded to the bearing bar ensures that the load slides across the whole of the Tramex deck surface.
Produced in both standard and special sizes, they do not require fixing and allow for quick and easy installation.

Where do you want to begin your selection?

standard
Choose
by panel.

Thanks to the electrowelded grating structure, Tramex decks provide a more uniform weight distribution over the entire surface, ensuring higher capacities even for concentrated loads. The sendzimir finish combines durability and load-bearing characteristics with affordability.
TECHNICAL SPECIFICATIONS
Standard Mesh Size (mm): 50 (flat) × 50 (wire)
Standard Load (Kg): from 1000 kg to 2250 kg
Standard Bar: pre-galvanized (30 x 1.5 – 42 x 1.5 – 47 x 1.5 – 51 x 1.5)
Finish: pre-galvanized

Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 890 42 1000 12,17
895 × 890 51 1500 14,12
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
945 × 890 42 1000 12,69
945 × 890 51 1500 14,74
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
995 × 890 42 1000 13,21
995 × 890 51 1500 15,36
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 1090 42 1000 13,12
895 × 1090 51 1500 15,13
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
945 × 1090 30 500 10,84
945 × 1090 42 1000 13,66
945 × 1090 51 1500 15,77
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
995 × 1090 30 500 11,25
995 × 1090 42 1000 14,20
995 × 1090 51 1500 16,40
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 1340 42 1500 18,29
895 × 1340 51 2250 21,22
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
945 × 1340 42 1500 19,07
945 × 1340 51 2250 22,15
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
995 × 1340 42 1500 19,86
995 × 1340 51 2250 23,08
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 615 30 339 6,77
895 × 615 42 679 8,65
895 × 615 51 1019 10,06
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
945 × 615 30 339 7,06
945 × 615 42 679 9,03
945 × 615 51 1019 10,50
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
995 × 615 30 339 7,34
995 × 615 42 679 9,40
995 × 615 51 1019 10,94

Features

BOX BEAM
STEEL STRUCTURAL PROFILES
Z-PROFILE
BEARING BAR
TOP FIXING
BOTTOM FIXING
CONNECTION CLIP
PRE-GALVANIZED

standard
Choose
by racking.

Thanks to the electrowelded grating structure, Tramex decks provide a more uniform weight distribution over the entire surface, ensuring higher capacities even for concentrated loads. The sendzimir finish combines durability and load-bearing characteristics with affordability.
TECHNICAL SPECIFICATIONS
Standard Mesh Size (mm): 50 (flat) × 50 (wire)
Standard Load (Kg): from 1000 kg to 2250 kg
Standard Bar: pre-galvanized (30 x 1.5 – 42 x 1.5 – 47 x 1.5 – 51 x 1.5)
Finish: pre-galvanized

Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 890 42 1000 12,17
895 × 890 51 1500 14,12
895 × 1090 42 1000 13,12
895 × 1090 51 1500 15,13
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
945 × 890 42 1000 12,69
945 × 890 51 1500 14,74
945 × 1090 30 500 10,84
945 × 1090 42 1000 13,66
945 × 1090 51 1500 15,77
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
995 × 890 42 1000 13,21
995 × 890 51 1500 15,36
995 × 1090 30 500 11,25
995 × 1090 42 1500 14,20
995 × 1090 51 1500 16,40
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 1340 42 1500 18,29
895 × 1340 51 2250 21,22
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
945 × 1340 42 1500 19,07
945 × 1340 51 2250 22,15
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
995 × 1340 42 1500 19,86
995 × 1340 51 2250 23,08
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 615 30 339 6,77
895 × 615 42 679 8,65
895 × 615 51 1019 10,06
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
945 × 615 30 339 7,06
945 × 615 42 679 9,03
945 × 615 51 1019 10,50
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
995 × 615 30 339 7,34
995 × 615 42 679 9,40
995 × 615 51 1019 10,94

Features

BOX BEAM
STEEL STRUCTURAL PROFILES
Z-PROFILE
BEARING BAR
TOP FIXING
BOTTOM FIXING
CONNECTION CLIP
PRE-GALVANIZED

standard
Choose
by pallet.

Thanks to the electrowelded grating structure, Tramex decks provide a more uniform weight distribution over the entire surface, ensuring higher capacities even for concentrated loads. The sendzimir finish combines durability and load-bearing characteristics with affordability.
TECHNICAL SPECIFICATIONS
Standard Mesh Size (mm): 50 (flat) × 50 (wire)
Standard Load (Kg): from 1000 kg to 2250 kg
Standard Bar: pre-galvanized ((30 x 1.5 – 42 x 1.5 – 47 x 1.5 – 51 x 1.5)
Finish: pre-galvanized

Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 890 42 1000 12,17
895 × 890 51 1500 14,12
945 × 890 42 1000 12,69
945 × 890 51 1500 14,74
995 × 890 42 1000 13,21
995 × 890 51 1500 15,36
895 × 1090 42 1000 13,12
895 × 1090 51 1500 15,13
945 × 1090 30 500 10,84
945 × 1090 42 1000 13,66
945 × 1090 51 1500 15,77
995 × 1090 30 500 11,25
995 × 1090 42 1000 14,20
995 × 1090 51 1500 16,40
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 1090 42 1000 13,12
895 × 1090 51 1500 15,13
945 × 1090 30 500 10,84
945 × 1090 42 1000 13,66
945 × 1090 51 1500 15,77
995 × 1090 30 500 11,25
995 × 1090 42 1000 14,20
995 × 1090 51 1500 16,40
895 × 1340 42 1500 18,29
895 × 1340 51 2250 21,22
945 × 1340 42 1500 19,07
945 × 1340 51 2250 22,15
995 × 1340 42 1500 19,86
995 × 1340 51 2250 23,08
Panel dimensions (mm) Bar height (mm) Load (kg/UDL) Load (kg/pc)
895 × 615 30 339 6,77
895 × 615 42 679 8,65
895 × 615 51 1019 10,06
945 × 615 30 339 7,06
945 × 615 42 679 9,03
945 × 615 51 1019 10,50
995 × 615 30 339 7,34
995 × 615 42 679 9,40
995 × 615 51 1019 10,94

Features

BOX BEAM
STEEL STRUCTURAL PROFILES
Z-PROFILE
BEARING BAR
TOP FIXING
BOTTOM FIXING
CONNECTION CLIP
PRE-GALVANIZED

custom
panel.

Thanks to the electrowelded grating structure, Tramex decks provide a more uniform weight distribution over the entire surface, ensuring higher capacities even for concentrated loads. The sendzimir finish combines durability and load-bearing characteristics with affordability. Our design department can study the sizes and loads alongside the customer (mixing mesh size and bar) to meet any requirement.
TECHNICAL SPECIFICATIONS
Custom Mesh Size (mm): from 25 (bar) × 19 (mesh) to 75 (bar) × 50 (mesh) or 50 (bar) × 100 (mesh)
Standard Load (Kg): from 1000 kg to 2250 kg
Standard Bar: pre-galvanized (30 x 1.5 – 42 x 1.5 – 47 x 1.5 – 51 x 1.5)
Finish: pre-galvanized, hot-dip galvanized, painted
Features
TR_Onlaid Solution - Type A
TR_Onlaid Solution - Type B
Z-Profile
BEARING BAR
TOP FIXING
BOTTOM FIXING
CONNECTION CLIP
PRE-GALVANIZED
Hot-dip galvanized
Painted
Related accessories
CNC WIRE BENDING SOLUTIONS
We have machines for 3D wire bending, which allow us...
Data sheet
PIGEON HOLES BAY DIVIDERS
With this system of panels, we can create all necessary...
Data sheet
HANGING BACK DIVIDERS AND FRONT-TO-BACK CLIP-IN DIVIDERS
This solution prevents material from falling down the back of...
Data sheet
CLIP-IN DIVIDERS WITH CONTOUR WIRE
This clip-on divider can be used in the “Front-to-Back” and...
Data sheet
PALLET STOPPER (WIRE)
The pallet stopper improves workplace safety by preventing damage to...
Data sheet
LATERAL FLUE SPACER MULTI-WIRE
Safety and fire regulations are of primary importance in logistics...
Data sheet
CENTRAL CLIP-IN FLUE SPACER
Safety and fire regulations are of primary importance in logistics...
Data sheet
LATERAL FLUE SPACER WIRE
Safety and fire regulations are of primary importance in logistics...
Data sheet
CLIP-IN DIVIDERS
The clip-in dividers are used in warehouses and storage areas...
Data sheet
HANGING DIVIDERS
Hanging dividers are used in logistics areas or sorting centres...
Data sheet
PALLET STOPPER (METAL SHEET)
The pallet stopper improves workplace safety by preventing damage to...
Data sheet
request information

tell us
your project.

Request a quote
Contact us
To top